Home ReviewsRefund
Home/Honda/Crosstour/Honda Crosstour I (2009-2012)/Repair manual/Memory Modules/DTC B1802: Power Seat Control Unit Failure
Contents Wiring diagrams Section: Memory Modules All sections

DTC B1802: Power Seat Control Unit Failure Honda Crosstour I

Memory Modules ~103 words

Note. If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).

  1. Clear the DTCs with the HDS.
  2. Turn the ignition switch to LOCK (0) and then back to ON (II).
  3. Wait for at least 6 seconds.
  4. Check for DTCs with the HDS. Is DTC B1802 indicated? YES -Replace the power seat control unit (see «POWER SEAT CONTROL UNIT INPUT TEST/REPLACEMENT»(ref-360134-S23042463652010042600000) ). NO -Intermittent failure, the system is OK at this time. Check for loose or poor connections.

More articles — Driving Position Memory System (Dpms)