Home/Honda/CR-V/Honda CR-V I (1995-1999)/Repair manual/Procedures/Maintenance Information: Specifications
Contents Wiring diagrams Section: Procedures All sections

Maintenance Information: Specifications Honda CR-V I

LUBRICATION SPECIFICATIONS

MaterialConditionSpecification
Engine Oil (1)Ambient Temperature Down To -20°F (-30°C) To Over 100°F (40°C)SAE 5W-30
Engine Oil (1)Ambient Temperature Over Than 20°F (-7°C)SAE 10W-30
Engine CoolantAll50/50 Mixture Distilled Water Ethylene Glycol
Power Steering FluidAllHonda Power Steering Fluid
Brake FluidAllDOT 3 or DOT 4
Automatic Transmission FluidAllDEXRON III
A/C RefrigerantAllR-134a
A/C LubricantAllND-OIL8
(1) SAE 5W-30 is preferred, use oils displaying the API certification mark with the Starburst Symbol.
(1)SAE 5W-30 is preferred, use oils displaying the API certification mark with the Starburst Symbol.

LUBRICATION SPECIFICATIONS

FLUID CAPACITIES

ItemConditionSpecification (1)
Engine OilDrained, With Filter4.0 Qts. (3.8L)
Engine CoolantDrained4.1 Qts. (3.9L)
Transmission FluidCapacity3.1 Qts. (2.9L)
Fuel TankCapacity15.3 Gal. (58.0L)
Windshield Washer ReservoirAll Other2.6 Qts. (2.5L)
Windshield Washer ReservoirCanada4.8 Qts. (4.5L)
(1) Capacities are recommended or calculated levels. Always use dipstick (if available) to measure level.
(1)Capacities are recommended or calculated levels. Always use dipstick (if available) to measure level.

FLUID CAPACITIES

WHEEL & TIRE SPECIFICATIONS

Wheel and tire information can be found on label attached to edge of driver's door.

BATTERY SPECIFICATIONS

CAUTIONWhen battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section.

If battery is replaced, new battery should be of the same group number as shown on the original battery's label.