Home/Honda/CR-V/Honda CR-V I (1995-1999)/Repair manual/Procedures/Maintenance Information: Overview
Contents Wiring diagrams Section: Procedures All sections

Maintenance Information: Overview Honda CR-V I

Procedures ~278 words

Fuse & Circuit Breaker Identification

  1. 1 - Not Used
  2. 2 - Not Used
  3. 3 - Rear Wiper/Washer
  4. 4 - Right Headlight High Beam
  5. 5 - Left Headlight High Beam
  6. 6 - Rear Accessory Power Socket
  7. 7 - Power Window Rear Left
  8. 8 - Power Window Rear Right
  9. 9 - IGN Coil
  10. 10 - Power Window Front Assistant
  11. 11 - Power Window Front Driver
  12. 12 - Turn Lights
  13. 13 - Fuel Pump (SRS Unit)
  14. 14 - Cruise Control
  15. 15 - ACG (IG), SP Sensor
  16. 16 - ABS
  17. 17 - Heater A/C Relay
  18. 18 - Running Light Relay (Canada Model)
  19. 19 - Back-Up Light
  20. 20 - Running Light (Canada Model)
  21. 21 - Right Headlight Low Beam
  22. 22 - Left Headlight Low Beam
  23. 23 - SRS
  24. 24 - Power Window Relay
  25. 25 - Meter
  26. 26 - Front Wiper, Front Washer
  27. 27 - Front Accessory Power Socket
  28. 28 - Radio
  29. 29 - Not Used
  30. 30 - Meter Light
  31. 31 - Starter Signal
  32. 32 - License Light, Taillight
  33. 33 - Inter Lock Unit
  34. 34 - Spare Fuse
  35. 35 - Spare Fuse
  36. 36 - Spare Fuse
  37. 37 - Spare Fuse
  38. 38 - Not Used

UNDERHOOD FUSE PANEL IDENTIFICATION

WARNINGAlways disconnect battery ground cable before servicing "high-current fuses. It is recommended that "high-current" fuses be replaced by a qualified technician.
  1. 1 - Main Fuse Battery
  2. 2 - Main Fuse Ignition Starter
  3. 3 - Rear Defogger
  4. 4 - Power Window
  5. 5 - Option
  6. 6 - Headlight
  7. 7 - Heater Motor
  8. 8 - Hazard
  9. 9 - Horn, Stop Light
  10. 10 - Door Lock Unit
  11. 11 - Cooling Fan
  12. 12 - Condenser Fan
  13. 13 - FI E/M (ECU), (PCM)
  14. 14 - Back-Up (Radio)
  15. 15 - Interior Light

ABS FUSE PANEL IDENTIFICATION

WARNINGAlways disconnect battery ground cable before servicing "high-current fuses. It is recommended that "high-current" fuses be replaced by a qualified technician.

Fuse Identification

  1. 1 - Motor Check
  2. 2 - ABS +B
  3. 3 - ABS Pump Motor