Ignition Switch (Except Hybrid): Removal & Installation Honda Civic VIII рестайлинг

Replacement

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) in the SRS before doing repairs or service.

Scheme 3

1. Make sure you have the anti-theft code for the audio or the navigation system, then write down the audio presets. Make sure the ignition switch is OFF.
2. Disconnect the negative battery cable.
3. Remove the driver's dashboard lower cover (see «DRIVER'S DASHBOARD LOWER COVER REMOVAL/INSTALLATION»(ref-255558-S21754772012007060300000) ), and the steering column covers (see «COLUMN COVER REMOVAL AND INSTALLATION»(ref-255491-S37005974502007060300000) ).
4. Disconnect the 7P connector (A) from the ignition switch (B).
5. Remove the two screws and the ignition switch.
6. Install in the reverse order of removal.
7. After reconnecting the battery, enter the anti-theft code for the audio or the navigation system, then enter the customer's audio presets, and set the clock.