Rear Inspection
Compare camber settings with vehicle manufacturer recommendations. See WHEEL ALIGNMENT SPECIFICATIONS . If camber is incorrect, check for bent or damaged rear suspension components. Replace faulty components. Recheck camber.
CASTER INSPECTION
Compare caster settings with vehicle manufacturer recommendations. See WHEEL ALIGNMENT SPECIFICATIONS . If caster is incorrect, check for bent or damaged front suspension components. Replace faulty components. Recheck caster.
TURNING ANGLE INSPECTION
- Turn wheel right and left while applying brake. Measure turning angle of both wheels. See «WHEEL ALIGNMENT SPECIFICATIONS»(ref-161546-S03831294702004041400000) . If turning angle is not within specification or the inward turning angles differ between the right and left side, go to next step.
- Check toe-in. If it is correct, but the turning angle is not within specification, check for bent or damaged suspension components.