Home ReviewsRefund
Home/Honda/Civic/Honda Civic IX (2011-2015)/Repair manual/Automatic Trans/A/t System Troubleshooting & Testing: Maintenance
Contents Wiring diagrams Section: Automatic Trans All sections

A/t System Troubleshooting & Testing: Maintenance Honda Civic IX

Automatic Trans ~128 words

PCM/TCM Reset

Note. To reset the PCM/TCM, initialize only the automatic transmission memory stored in the PCM or the TCM.

  1. Select the A/T system with the HDS.
  2. Reset the PCM/TCM with the HDS while the engine is stopped.
  3. Turn the ignition switch to LOCK (0).
  4. Turn the ignition switch to ON (II), and wait for 30 seconds, then disconnect the HDS from the DLC. Failure Reproduction Technique NOTE: Make sure to follow these points while the vehicle is raised on a lift for the test-drive. Disable the VSA (if equipped) by pressing the VSA OFF button. ABS or VSA DTC(s) may come on when test-driving on a lift. If the ABS or VSA DTC(s) come on, clear the DTC(s) with the HDS.

More articles — A/t System Troubleshooting & Testing