Memorizing a Seat Position
Move the seat to the desired position. Turn the ignition switch to ON (II).
Press and hold the SET button on the driver's position memory switch. A single beep will be heard and both of the green LEDs will begin to flash. Press No. 1 or No. 2 to match the remote that is to be used. There will be two more beeps confirming that the seat position has been memorized. The green LED will remain lit, unless the seat is moved from the memorized position.
Memorized Position Recall With the Remotes
After the seat position has been memorized, the seat will move to the memorized position when the appropriate remote UNLOCK is pressed and the driver's door is opened. When the seat move to the memorized position, the green LED corresponding with that remote will stay lit until the position is changed or the key is turned to LOCK (0).
Scheme 194
Power Seat Position Sensors
Each motor has a sensor that detects motor rotation and sends a pulse to the power seat control unit when the motor rotates. The control unit stores the number of pulses in its memory, and the seat position is memorized.
Power Door Lock Settings
The power door lock setting are customizable by the customer according to their preferences (refer to the Owner's Manual under door locks for more details). These setting are controlled independently by remotes (Driver 1 and Driver 2).
