Home ReviewsRefund
Home/Honda/Accord/Honda Accord VIII (2007-2011)/Repair manual/Seats/Driver Position Memory System (Dpms) (V6): Adjustments
Contents Wiring diagrams Section: Seats All sections

Driver Position Memory System (Dpms) (V6): Adjustments Honda Accord VIII

Seats 2 illustrations ~158 words

Power Seat Adjustment Switch Test/Replacement

Note. SRS components are located in this area. Review the SRS component locations 4-door (see COMPONENT LOCATION INDEX ), 2-door (see 2-DOOR ), and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or servicing.

Scheme 183

Scheme 183: Power Seat Adjustment Switch Test/Replacement
Scheme 183: Power Seat Adjustment Switch Test/Replacement

Scheme 184

Scheme 184
Scheme 184
  1. Remove the driver's seat (see «FRONT SEAT REMOVAL/INSTALLATION»(ref-423729-S11745072942011092800000) ).
  2. Remove the power seat adjustment switch knobs (A) and the recline cover from the driver's seat. 4-door (see «4-DOOR»(ref-423729-S27948995602011092800000) ) 2-door (see «FRONT SEAT CUSHION COVER REPLACEMENT»(ref-423729-S34706779432011092800000) )
  3. Remove the two screws and the power seat adjustment switch (B).
  4. Disconnect the 12P connector from the power seat adjustment switch.
  5. Reinstall the adjustment switch knobs to the switch.
  6. Check for continuity between the terminals in each position according to the table. *:There is continuity without operating a switch.
  7. If the continuity is not as specified, replace the switch.
  8. Install the switch in the reverse order of removal.

More articles — Driver Position Memory System (Dpms) (V6)