Power Window System: Diagnosis Honda Accord VI

Driver's Window Motor Test

Motor Test

Scheme 4

Scheme 5

1. Remove the driver's door panel (see «DOOR PANEL REMOVAL/INSTALLATION - COUPE»(ref-178652-S02767084052005061800000) ).
2. Disconnect the 4P connector from the window motor.
3. Test the motor in each direction by connecting battery power and ground according to the table. When the motor stops running, disconnect one lead immediately.
4. If the motor does not run or fails to run smoothly, replace it. Pulser Test
5. Connect the test leads of an analog ohmmeter to the No. 3 and No. 4 terminals.
6. Run the motor by connecting power and ground to the No. 1 and No. 2 terminals. The ohmmeter needle should move back and forth alternately.

Scheme 6

Scheme 7

1. Remove the passenger's door panel (see «DOOR PANEL REMOVAL/INSTALLATION - COUPE»(ref-178652-S02767084052005061800000) ).
2. Disconnect the 2P connector from the window motor.
3. Check window motor operation by connecting power and ground according to the table. When the motor stops running, disconnect one lead immediately.
4. If the motor does not run or fails to run smoothly, replace it.