Home/Honda/Accord/Honda Accord VI (1997-2002)/Repair manual/Automatic Trans/Automatic Transmission Removal & Installation: Application
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission Removal & Installation: Application Honda Accord VI

Automatic Trans ~110 words

APPLICATION

Note. For 1999 Isuzu Oasis information, see 1998 Honda Odyssey repair data. For Honda Passport transmission servicing information, refer to Isuzu Rodeo in AUTOMATIC TRANSMISSION SERVICING - ISUZU article.

Note. For Honda Passport transmission removal information, refer to Isuzu Rodeo in AUTOMATIC TRANSMISSION REMOVAL - ISUZU article.

ApplicationTransaxle Model
AccordBAXA Or MAXA
Civic
CVTM4VA
4-SpeedB4RA Or S4RA
CR-VMDLA Or MDMA
OdysseyB7TA
PreludeM6HA

AUTOMATIC TRANSAXLE APPLICATIONS

CAUTIONVehicles are equipped with a Supplemental Restraint System (SRS). When servicing vehicle, use care not to cause accidental air bag deployment. All SRS electrical connections and wiring harness are covered with Yellow insulation. Related components are located in steering column, center console, instrument panel and lower panel on instrument panel. DO NOT use electrical test equipment on these circuits. It may be necessary to deactivate SRS before servicing components. See AIR BAG DEACTIVATION PROCEDURES article in GENERAL INFORMATION.

Note. Obtain radio anti-theft code from customer before disconnecting negative battery cable. Radio anti-theft code must be re-entered into radio once negative battery cable is reconnected. To re-enter radio anti-theft code, turn ignition and radio on. When CODE is displayed on radio, re-enter radio anti-theft code by using the radio station preset buttons.