4.8L
Note. Additional steps may be necessary depending on body builder.
- Disconnect negative battery cable. Remove air cleaner and drain cooling system. Disconnect accelerator cable and detent cable (automatic transmission) from throttle lever. Disconnect wiring harness at bulkhead.
- Remove radiator hoses from radiator and heater hoses from engine. Remove radiator, fan and water pump pulley. Disconnect fuel line from fuel pump. Disconnect vacuum hoses and evaporative emission hoses. Remove hood. Raise vehicle.
- Remove starter, flywheel or converter inspection cover, and exhaust pipe from manifold. If equipped with automatic transmission, remove converter-to-flex plate bolts. Attach lifting device and remove weight from engine mount bolts. Remove engine mount bolts.
- Remove front engine mounting through bolts. Remove bellhousing retaining bolts and support transmission with chain. Lower vehicle and attach lifting device. Remove engine.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Bellhousing-to-Engine | 35 (47) |
| Flex Plate-to-Converter | 35 (47) |
| Front Mount Through Bolt | 75 (102) |
| Rear Mount-to-Crossmember | 36 (49) |
| Rear Mount-to-Transmission | 50 (68) |
TORQUE SPECIFICATIONS