Home/Geo/Prizm/Geo Prizm II (1992-1997)/Repair manual/Wheel Alignment/Wheel Alignment Specifications & Procedures: Specifications

Contents

Wiring diagrams Section: Wheel Alignment

Pre-Alignment Checks

Riding Height Adjustment

All sections

Wheel Alignment Specifications & Procedures: Specifications Geo Prizm II

Wheel Alignment

TORQUE SPECIFICATIONS

Application		Ft. Lbs. (N.m)
Front Wheel Bearing Lock Nut Tracker		155 (210)
Lateral Link Lock Nuts		41 (56)
Spindle Nut (Front)		159 (216)
Strut-To-Knuckle Nuts & Bolts
Front		203 (275)
Rear		105 (142)
Tie Rod End Lock Nuts		41 (56)
Wheel Lug Nuts		76 (103)

TORQUE SPECIFICATIONS

Application		Preferred	Range
Camber (2)
Front		0.17	0.9 To 0.6
Rear		0.92	1.97 To -0.17
Caster (2)
Front		1.33	0.58 To 2.08
Toe-In (2)
Front		0.1	0.1 To 0.3
Rear		0.3	0.1 To 0.5
Toe-In (3)
Front		0.05 (1.5)	0.05 To 0.15 (-1.5 To 4.0)
Rear		0.15 (4)	0.05 To 0.25 (1.5 To 6.5)
Toe-Out On Turns (2)
Inner		39	N/A
Outer		33	N/A
(1) Caster and camber are not adjustable. (2) Measurement in degrees. (3) Measurement in inches (mm).

(1)	Caster and camber are not adjustable.

(2)	Measurement in degrees.

(3)	Measurement in inches (mm).

WHEEL ALIGNMENT SPECIFICATIONS (1)