Home/Ford/Windstar/Ford Windstar I (1994-2003)/Repair manual/Procedures/Maintenance Information: Specifications
Contents Wiring diagrams Section: Procedures All sections

Maintenance Information: Specifications Ford Windstar I

LUBRICATION SPECIFICATIONS

MaterialConditionSpecification
Engine Oil (1)Ambient Temperature Down To -15°F (-25°C) To Over 100°F (38°C)SAE 5W-30
Engine CoolantAll50/50 Mixture Distilled Water Ethylene Glycol
Brake FluidAllDOT 3
Automatic Transmission FluidAllMercon ATF
Power Steering FluidAllType F ATF
(1) SAE 5W-30 is preferred, use oils displaying the API certification mark with the Starburst Symbol.
(1)SAE 5W-30 is preferred, use oils displaying the API certification mark with the Starburst Symbol.

LUBRICATION SPECIFICATIONS

FLUID CAPACITIES

ItemConditionSpecification (1)
Engine OilDrained, With Filter4.5 Qts. (4.30L)
Engine OilDrained, Without Filter4.0 Qts. (3.80L)
Engine CoolantDrained, With Rear Heater14.0 Qts. (13.2L)
Engine CoolantDrained, Without Rear Heater12.0 Qts. (11.3L)
Automatic Transmission FluidCapacity12.25 Qts. (11.6L)
Fuel TankLX25.0 Gal. (94.6L)
Fuel TankGL: Standard20.0 Gal. (75.7L)
Fuel TankGL: Optional25.0 Gal. (94.6L)
(1) Capacities are recommended or calculated levels. Always use dipstick (if available) to measure level.
(1)Capacities are recommended or calculated levels. Always use dipstick (if available) to measure level.

FLUID CAPACITIES

BATTERY SPECIFICATIONS

CAUTIONWhen battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section before disconnecting battery.