MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft® SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent | WSS-M2C930-A |
MATERIAL SPECIFICATIONS
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Fuel Pressure | |
| Key ON Engine OFF (KOEO) and Key ON Engine Running (KOER) fuel pressure | 393-413 kPa (57-60 psi) |
| Fuel Tank Capacity | |
| Fuel tank capacity | 58.3L (15.4 gal) |
GENERAL SPECIFICATIONS
The fuel system consists of
- a 1-speed Mechanical Returnless Fuel System (MRFS) with sequential Multi-Port Fuel Injection (MFI).
- a standard fuel tank.
- a Fuel Tank Pressure (FTP) sensor incorporated in the fuel vapor tube assembly (part of the fuel tank assembly).
- a Fuel Pump (FP) module containing: an electric FP , which provides pressurized fuel to the fuel rail. a serviceable fuel level sender mounted on the FP module. a check valve, which maintains system pressure after the FP is shut off. a pressure relief valve for overpressure protection in the event of restricted fuel flow. a lifetime fuel filter (serviced as part of the FP module).
- a fuel rail.
- an electronic FP module which is enabled by the PCM to control fuel rail pressure.
- separately controlled fuel injectors for each cylinder. The fuel injectors are mounted to the intake manifold and supplied with pressurized fuel from the FP module to the fuel rail.
- fuel, vapor and brake tubes in an integrated bundle assembly attached to the underside of the vehicle by retaining clips.
- a one-fourth turn vented type fuel tank filler cap.
- a fuel tank filler pipe which: has a recirculation tube. has a fresh air hose. has a restrictor plate to permit only unleaded fuel to be pumped into the tank. cannot be modified in any way and is serviced only by the installation of a new fuel tank filler pipe.
- an IFS switch located behind the RF lower cowl trim panel.