GENERATOR SPECIFICATIONS
| Application | Specification |
|---|
| Generator Amperage Rating | 105 Amps |
| Load Test (1) |
| With Tester Load (2) | (3) |
| Without Tester Load (4) | (5) |
| No-Load Test (1) (2) | 13-15 Volts |
| (1) All tests are performed with engine running at 2000 RPM. (2) All accessories off. (3) Adjust tester load bank to determine generator output. (4) Perform this test with engine running, A/C on, blower motor on high speed, and headlamps on high beam. (5) With accessories on, voltage should increase a minimum of 0.5 volt above base voltage. |
| (1) | All tests are performed with engine running at 2000 RPM. |
| (3) | Adjust tester load bank to determine generator output. |
| (4) | Perform this test with engine running, A/C on, blower motor on high speed, and headlamps on high beam. |
| (5) | With accessories on, voltage should increase a minimum of 0.5 volt above base voltage. |
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|
| Generator Mounting Bolts | 35 (48) |
| Generator Expanding Bushing/Bolt Assembly |
| Step 1 | 15 (20) |
| Step 2 | Turn Additional 90 Degrees |
| INCH Lbs. (N.m) |
| Battery Ground Cable Bolt | 62 (7) |
| Generator B+ Terminal Nut | 71 (8) |
