WHEEL TIGHTENING
Tighten all wheels to 85-105 ft. lbs. (115-142 N.m). If wheels are equipped with locking type lug nuts, ALWAYS position Keyed nut opposite valve stem.
Note. Vehicles with anti-theft wheels have one locking lug nut on each wheel. The key for this nut is attached to the lug wrench in spare tire compartment.
| CAUTION | Lug nut key should be held square to the lug nut; key and lug nut can be damaged if it is held at an angle. DO NOT use a power impact wrench on the lug nut key. |
BATTERY SPECIFICATIONS
| CAUTION | When battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section. |