MATERIAL SPECIFICATION
| Item | Specification | Fill Capacity |
|---|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) | MERCON® V | |
| PAG Refrigerant Compressor Oil (R-134a Systems) YN-12-D | WSH-M1C231-B | 207 ml (7 fl oz) |
| R-134a Refrigerant YN-19 (US); CYN-16-P or CYN-16-R (Canada) | WSH-M17B19-A | 0.74 kg (26 oz) (1.63 lb) |
MATERIAL SPECIFICATION
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Magnetic Clutch | |
| Air gap between pulley and clutch plate | 0.35-0.65 mm (0.014-0.026 in) |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| A/C compressor bolts | 25 |
| A/C compressor fitting nuts (suction and discharge) | 15 |
| A/C compressor mounting stud | 9 |
| A/C compressor nut | 25 |
| A/C compressor pressure relief valve | 10 |
| A/C clutch disc and hub bolt | 14 |
| Condenser bolts - 3.5L | 6 |
| Condenser bolts - 3.5L Gasoline Turbocharged Direct Injection (GTDI) | 8 |
| Condenser fitting nuts (inlet and outlet) | 15 |
| Cross-vehicle beam nuts | 30 |
| Evaporator inlet line fitting nut | 15 |
| Evaporator outlet line fitting nut | 15 |
| Floor duct adapter bolts | 9 |
| Heater core and evaporator core housing bolts | 9 |
| High-pressure Schrader-type valve | 2.5 |
| High-pressure service gauge port valve cap | 0.8 |
| Low-pressure Schrader-type valve | 1.8 |
| Low-pressure service gauge port valve cap | 0.8 |
| Radiator bracket bolts | 9 |
| Receiver/drier bolt | 9 |
| Receiver/drier outlet fitting nut | 15 |
| Roll restrictor bracket bolt | 48 |
| Thermostatic Expansion Valve (TXV) bolts | 8 |
| TXV fitting nut | 8 |
| TXV manifold and tube bracket bolt | 15 |
| TXV manifold and tube clamp bracket bolt | 9 |
| Strut tower brace nuts | 30 |
TORQUE SPECIFICATIONS