Home/Ford/Taurus/Ford Taurus VI (2009-2012)/Repair manual/Charging System/Battery, Battery Mounting & Battery Cables: Specifications
Contents Wiring diagrams Section: Charging System All sections

Battery, Battery Mounting & Battery Cables: Specifications Ford Taurus VI

GENERAL SPECIFICATIONS

ItemSpecification
Battery amps rating (vehicles without a push button start system)58 amp/hr
Battery amps rating (vehicles with a push button start system)72 amp/hr
Cold Cranking Amps (CCA) measured at -18°C (0°F) (vehicles without a push button start system)540 CCA
CCA measured at -18°C (0°F) (vehicles with a push button start system)650 CCA
Voltage12 Volts

GENERAL SPECIFICATIONS

TORQUE SPECIFICATIONS

DescriptionNm
Battery cable terminal nuts5
Battery Junction Box (BJB) cable nut (3.5L)12
Battery terminal cable end nuts9
Battery tray bolts15
Battery tray nut15
Body ground cable bolt (3.5L)12
Electronic Power Assist Steering (EPAS) ground wire bolt (3.5L Gasoline Turbocharged Direct Injection (GTDI))10
EPAS harness bracket bolt (3.5L GTDI )10
Engine cover ball stud (3.5L GTDI )6
Engine ground cable bolt15
Generator B+ cable nut17
Radio interference capacitor bolt (3.5L GTDI )15
Starter B+ cable nut12
Starter solenoid terminal nut5

TORQUE SPECIFICATIONS