Rear View Mirror System: Removal & Installation Ford Taurus IV рестайлинг

Removal and Installation

1. Remove the interior rear view mirror. Insert a small flat-blade screwdriver into the slot at the base of the mirror. Hold the mirror and pull the screwdriver rearward until the mirror snaps off the interior rear view mirror bracket.
2. Using the special tool, install the interior rear view mirror.

Scheme 28

Scheme 29

Scheme 30

Scheme 31

1. If equipped, position the electronic compass sensor aside.
2. Disconnect the auto-dimming interior mirror electrical connector.
3. Position the auto-dimming interior rear view mirror outboard (towards the driver door) to its full extension.
4. Rotate the auto-dimming interior mirror back until it is parallel with the windshield. The auto-dimming interior mirror mount is now locked between the two adjustment balls and joints.
5. Hold the auto-dimming interior mirror firmly in one hand and strike the auto-dimming interior mirror with the palm of an open hand.

Scheme 32

Scheme 33

Scheme 34

1. Seat the auto-dimming interior mirror base partially on the mounting button.
2. Rotate the auto-dimming interior mirror fully up.
3. Slide the auto-dimming interior mirror base down on the mounting button until a click is heard.
4. Connect the auto-dimming interior mirror electrical connector.
5. If equipped, install the electronic compass sensor.