Contents Section: Removal & Installation All sections

Engine Emission Control System: Specifications Ford Ranger II рестайлинг

TORQUE SPECIFICATIONS

DescriptionNm
Crankcase vent oil separator bolts (2.3L engine)10
Crossmember retaining bolts99
Crossmember retaining nuts99
EGR tube57
EGR vacuum regulator solenoid bolts (4.0L engines)10
EGR valve bolts (2.3L engine)20
EGR valve bolts (4.0L engine)25
Exhaust inlet crossover pipe bolts40
Exhaust manifold-to-EGR valve tube fitting (2.3L engine)55
Exhaust manifold-to-EGR valve tube fittings (4.0L engines)50

TORQUE SPECIFICATIONS

Note. Do not remove any part of the engine emission control system. Operating the engine without the engine emission control system intact will reduce fuel economy and engine ventilation. This will weaken engine performance and shorten engine life.

The engine emission control system includes the

  1. EGR valve.
  2. EGR valve-to-intake manifold tube (2.3L).
  3. exhaust manifold-to-EGR valve tube (4.0L SOHC).
  4. EGR vacuum regulator solenoid.
  5. PCV valve.