Engine System-General Information: Specifications Ford Mustang V

GENERAL SPECIFICATIONS

GENERAL SPECIFICATIONS

Note. This article contains information, steps and procedures that may not be specific to your engine.

This article covers general procedures and diagnosis and testing of the engine system, except for exhaust emission control devices, which are covered in the INTRODUCTION - GASOLINE article.

The engine incorporates

1. a closed positive crankcase ventilation (PCV) system. For additional information, refer to «ENGINE EMISSION CONTROL - 4.0L SOHC»(ref-256501) .
2. an exhaust emission control system. For additional information, refer to «ENGINE EMISSION CONTROL - 4.0L SOHC»(ref-256501) .
3. an evaporative emission control system. For additional information, refer to «EVAPORATIVE EMISSIONS»(ref-256502) .

Some engines incorporate a fail-safe cooling system. Refer to the appropriate procedure in this article.

The engine, fuel system, ignition system, emissions system and exhaust system all affect exhaust emission levels and must be maintained according to the maintenance schedule. Refer to the scheduled Maintenance Guide.

Correct engine identification is required to order parts. Refer to the appropriate procedure in this article.

For complete vehicle and engine identification codes, refer to IDENTIFICATION CODES .

SPECIAL TOOL(S) Commercially Available Hydraulic Lash Adjuster Leakdown Tester - Quick Disconnect Compression Tester 134-R0212 or equivalent Dial Indicator Gauge Adapter 303-007 (TOOL-6565-AB) or equivalent Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent Engine Cylinder Leak Detection/Air Pressurization Kit 014-00708 or equivalent Oil Pressure Gauge 303-088 (T73L-6600-A) UV Leak Detector Kit 164-R0756 or equivalent Vacuum/Pressure Tester 164-R0253 or equivalent

Scheme 904

Scheme 905

Scheme 906

Scheme 907

Scheme 908

Scheme 909

MATERIAL SPECIFICATIONS

See also:
• AUTOMATIC TRANSAXLE/TRANSMISSION