Home/Ford/Kuga/Ford Kuga II (2012-2016)/Repair manual/Testing & Diagnostics/Engine Controls - Introduction (Except Diesel & Hybrid) (Se…
Contents Wiring diagrams Section: Testing & Diagnostics All sections

Engine Controls - Introduction (Except Diesel & Hybrid) (Section 0): Overview Ford Kuga II

Note. The descriptions and specifications contained in this service information were in effect at the time this information was approved for publication. Ford Motor Company reserves the right to discontinue models at any time, or change specifications or design without notice and without incurring obligation.

Section 1: Description and Operation

This Section contains description and operation information on powertrain control systems and components and provides the technician with a general knowledge of the powertrain control system. Use this Section when general information about the powertrain control system is desired. For additional information, refer to ENGINE CONTROLS - DESCRIPTION & OPERATION (EXCEPT DIESEL & HYBRID) (SECTION 1).

Section 4: Powertrain Diagnostic Trouble Code (DTC) Charts and Descriptions

This Section contains the Diagnostic Trouble Code (DTC) Charts and Descriptions. These charts and descriptions are referenced if a DTC is retrieved in ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) (SECTION 3). Also included in this information is the list of possible causes and diagnostic aids. For additional information, refer to ENGINE CONTROLS - POWERTRAIN DTC CHARTS & DESCRIPTIONS (EXCEPT DIESEL & HYBRID) (SECTION 4).