Module Programming
Module reprogramming (also referred to as "flashing") is a scan tool process which updates the strategy/calibration in a module. Reprogramming a module with the same level of software does not improve module operation or repair a hardware failure. Module reprogramming is automatically carried out during PMI when a later strategy/calibration is available.
Limit module reprogramming to circumstances where a published TSB procedure recommends doing so. Some modules limit the number of times it can be reprogrammed.
A module cannot communicate with other modules on the communication network while being reprogrammed. After the reprogramming process, clear any network communication Diagnostic Trouble Codes (DTCs) which may have been set in other modules.
Some modules are reprogrammed in coordination with other modules. Follow the IDS key cycling instructions carefully to avoid reprogramming errors, including failure of programming one or more of the modules.
Programmable Parameters
Programmable parameters are customer preference items that may be modified by the dealer via the scan tool or in some cases, modified by the customer following a procedure listed in the Owner's Literature. While many configuration options may exist for a module, only a few of these options are programmable parameters. Some parameters must be changed in multiple modules at the same time.
Module Configuration and Parameter Chart
The charts describe specific module configuration information
Module Configuration and Parameter Chart (Except BCM and IPC)
| Module Name | Programmable Module Installation (PMI) Available | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Progammable Parameters |
|---|---|---|---|---|
| ABS module | Yes | Yes | IVD initialization Lateral sensor calibration Longitudinal sensor calibration Pressure sensor calibration Central configuration data parameter learning | None |
| APIM | Yes | Yes | No | Date format Rear camera |
| ACM | Yes | Yes | No | None |
| DSP | Yes | Yes | No | None |
| DDM | No | Yes | Window AUTO up/down functionality | None |
| DSM | No | Yes | No | None |
| FCIM | No | Yes | No | None |
| FCDIM | Yes | Yes | No | None |
| GPSM | Yes | Yes | No | None |
| Headlamp Control Module (HCM) | No | Yes | No | None |
| HVAC module | No | Yes | No | None |
| IPMB (if equipped) | Yes | Yes | No | None |
| OCSM | No | Yes | Seat weight sensor re-zero | None |
| PAM | No | Yes | No | None |
| PDM | No | No | Window AUTO up/down functionality | None |
| PSCM | No | Yes | No | None |
| PCM | Yes | Yes | No | None |
| RGTM | No | Yes | No | None |
| RFA module | No | Yes | No | None |
| RCM | Yes | Yes | No | None |
| SODL | No | Yes | No | None |
| SODR | No | Yes | No | None |
| SASM | No | No | No | None |
| TRM | No | Yes | No | None |
Body Control Module (BCM) and Instrument Panel Cluster (IPC)
Note. The Body Control Module (BCM) and IPC have a unique procedure to set Car Configuration Parameters. Configuration changes made will affect both modules. On the scan tool, first select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Retrieve the Vehicle Configuration Data. Next select Module Programming > Programmable Parameters > Car Configuration Parameter(s) > Vehicle Configuration > Modify and Reinstate Vehicle Configuration Data. Change parameters as needed.
| Module Name | Programmable Module Installation (PMI) Available | Reprogram/Flash Capable | Requires Adaptive Learning or Calibration | Available Car Configuration Parameters |
|---|---|---|---|---|
| BCM | Yes (through Car Configuration Parameters. Refer to MULTIFUNCTION ELECTRONIC MODULES -- ESCAPE . | Yes | No | NOTE: Do not change car configuration parameters except those listed below. Courtesy wipe disable BLIS® enable/disable Loud speaker quantities (6, 9 or 10) Language Park assist camera Remote start enable/disable Tire size Towbar Trailer module Trailer stability assist |
| IPC | Yes | Yes | No |
| NOTE |
|---|
| Do not change car configuration parameters except those listed below. |