Electronic Engine Controls: Other Ford Grand C-MAX II

Materials

Scheme 26

1. WARNING: Before beginning any service procedure , refer to «HEALTH AND SAFETY PRECAUTIONS»(ref-539149-S05516616262013040100000) Safety Warnings in information 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «HEALTH AND SAFETY PRECAUTIONS»(ref-539149-S05516616262013040100000) (100-00 General Information, Description and Operation).
2. Refer to: «AIR CLEANER»(ref-539209-S08535137802013040100000) (303-12 Intake Air Distribution and Filtering, Removal and Installation).
3. Visual check.

Scheme 27

1. Apply the specified lubricant to the specified component. Material : Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor Oil / XO-5W20-QSP (WSS-M2C945-A) Torque : 8 Nm
2. Refer to: «AIR CLEANER»(ref-539209-S08535137802013040100000) (303-12 Intake Air Distribution and Filtering, Removal and Installation).

Scheme 28

Scheme 29

1. WARNING: Before beginning any service procedure, refer to «HEALTH AND SAFETY PRECAUTIONS»(ref-539149-S05516616262013040100000) Safety Warnings in information 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «HEALTH AND SAFETY PRECAUTIONS»(ref-539149-S05516616262013040100000) (100-00 General Information, Description and Operation).
2. Refer to: «JACKING AND LIFTING - OVERVIEW»(ref-539167-S37930574612013040100000) (100-02 Jacking and Lifting, Description and Operation).
3. Apply the specified chemical with a spray can. Special Tool(s) : 303-476 (T94P-9472-A) Socket, Exhaust Gas Oxygen Sensor Material : Penetrating and Lock Lubricant / XL-1

Scheme 30

1. Apply the specified lubricant to the specified component. Material : High Temperature Nickel Anti-Seize Lubricant / XL-2
2. Special Tool(s) : 303-476 (T94P-9472-A) Socket, Exhaust Gas Oxygen Sensor
3. Calculate the correct torque wrench setting for the following torque. Refer to the Torque Wrench Adapter Formula in illustration below. Torque : 48 Nm

Scheme 31

1. 2.
2. 3.

Scheme 32

Scheme 33

Scheme 34

Scheme 35

1. Refer to: «AIR CLEANER»(ref-539209-S08535137802013040100000) (303-12 Intake Air Distribution and Filtering, Removal and Installation).
2. General Equipment : Hose Clamp(s)
3. NOTE: Have new component ready to install to minimize coolant loss. NOTE: Be prepared to capture escaping fluid.

Scheme 36

Scheme 37

1. WARNING: Before beginning any service procedure, refer to «HEALTH AND SAFETY PRECAUTIONS»(ref-539149-S05516616262013040100000) Safety Warnings in information 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «HEALTH AND SAFETY PRECAUTIONS»(ref-539149-S05516616262013040100000) (100-00 General Information, Description and Operation).
2. Refer to: «AIR CLEANER»(ref-539209-S08535137802013040100000) (303-12 Intake Air Distribution and Filtering, Removal and Installation).
3. Apply the specified chemical with a spray can. Special Tool(s) : 303-476 (T94P-9472-A) Socket, Exhaust Gas Oxygen Sensor Material : Penetrating and Lock Lubricant / XL-1

Scheme 38

1. Apply the specified lubricant to the specified component. Material : High Temperature Nickel Anti-Seize Lubricant / XL-2
2. Special Tool(s) : 303-476 (T94P-9472-A) Socket, Exhaust Gas Oxygen Sensor
3. Calculate the correct torque wrench setting for the following torque. Refer to the Torque Wrench Adapter Formula below. Torque : 48 Nm

1. 2.
2. 3. Refer to: «AIR CLEANER»(ref-539209-S08535137802013040100000) (303-12 Intake Air Distribution and Filtering, Removal and Installation).