Transaxle Draining and Filling
| Item | Specification |
|---|
| SAE 75W-90 Premium Gear Oil XY-75W90-QGL | WSS-M2C203-A1 |
Scheme 7
| Item | Part Number | Description |
|---|
| 1 | | Drain plug |
| 2 | | Fill plug |
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to «JACKING AND LIFTING»(ref-291849) article.
- Remove the drain plug and drain the fluid. Position a drain pan under the transaxle.
- Install a new washer and the drain plug. Tighten to 49 Nm (36 lb-ft).
- Remove the fill plug.
- Fill the transaxle with the recommended fluid. Item Part Number Description 1 - Correct level 2 - Low level
- Install a new washer and fill plug. Tighten to 49 Nm (36 lb-ft).
