Home/Ford/Focus/Ford Focus III (2011-2015)/Repair manual/Engine Control Systems/Acceleration Control System - Except Electric: Removal & In…

Contents

Wiring diagrams Section: Engine Control Systems

All sections

Acceleration Control System - Except Electric: Removal & Installation Ford Focus III

Engine Control Systems 1 illustration

Removal

Note. Removal steps in this procedure may contain installation details.

Note. To prevent setting Diagnostic Trouble Codes (DTCs), make sure the ignition switch is in the OFF position prior to disconnecting the accelerator pedal electrical connector.

Note. The sport metallic accelerator pedal pad is not to be re-used. If the sport metallic accelerator pedal pad is removed it should be discarded and replaced with a new sport metallic accelerator pedal pad.

Scheme 1

Scheme 1: Removal

Scheme 1: Removal

Torque : 8 Nm

Installation

To install, reverse the removal procedure.