GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Generator | |
| Generator amps | 88/150 amps (max) @ 1,800-6,000 generator RPM, approximately 500-2,000 engine RPM |
| Voltage | 12 volt |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Accessory drive splash shield screws | 5 | 44 | |
| Center support bracket bolts | 30 | 22 | |
| Generator air duct bolts/nuts | 12 | 106 | |
| Generator B+ terminal nut | 17 | 150 | |
| Generator mounting bolts/nuts | 47 | 35 | |
| Generator studs | 24 | 18 | |
| Radial arm adapter nut | 9 | 80 |
TORQUE SPECIFICATIONS
The charging system is a negative ground system consisting of the following
- Generator
- Internal voltage regulator
- Charging system warning indicator
- Battery
- Circuitry and cables
- PCM
The generator is driven by the accessory drive belt. When the engine is started, the generator begins to generate AC which is internally converted to DC. The DC current is controlled by the voltage regulator (located on the rear of the generator) and supplied to the battery.
See also:
• PINPOINT TESTS - GASOLINE MODELS