GENERAL SPECIFICATIONS - LUBRICANTS
| Item | Specification |
|---|---|
| Silicone Brake Caliper Grease and Dielectric Compound XG-3-A | ESE-M1C171-A |
GENERAL SPECIFICATIONS - LUBRICANTS
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Base ignition timing (not adjustable) | 10 degrees BTDC |
| Firing order | 1-3-4-2 |
| Spark plug gap mm (in) | 1.25-1.35 0.049-0.053 |
| Original spark plug | AGSF22YPC |
| Replacement spark plug | AGSF22YPC |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Spark plugs | 12 |
| Coil mounting bolts | 10 |
TORQUE SPECIFICATIONS
The electronic ignition (EI) system for the 2.0L and 2.3L engines consists of the following components
- Coil on plug
- Spark plugs
- Crankshaft position (CKP) sensor
- Camshaft position (CMP) sensor
The crankshaft position (CKP) sensor
- is a variable reluctance sensor.
- is mounted on the engine front cover.
- is triggered by a 36-minus-1 tooth trigger wheel located on the crankshaft pulley and damper.
- provides ignition timing and crankshaft speed (rpm) to the powertrain control module (PCM).
Refer to ELECTRONIC ENGINE CONTROLS for removal and installation of the CKP sensor.
The coil on plug
- is controlled by the PCM.
- fires 2 spark plugs simultaneously.
The spark plug
- ignites the fuel and air mixture.
Refer to the INTRODUCTION - GASOLINE for diagnosis and testing of the ignition system.
Scheme 1
- For additional information, refer to the appropriate procedure in this article.