Home ReviewsRefund
Home/Ford/Focus/Ford Focus I facelift (2001-2007)/Repair manual/Mechanical/Engine System - General Information: Removal & Installation
Contents Wiring diagrams Section: Mechanical All sections

Engine System - General Information: Removal & Installation Ford Focus I facelift

Mechanical 1 illustration ~118 words

Cylinder Block Core Plug Replacement

Special Tools Illustration Tool Name Tool Number Slide Hammer 100-001 (T50T-100-A)

Scheme 90

Scheme 90: Cylinder Block Core Plug Replacement
Scheme 90: Cylinder Block Core Plug Replacement
ItemSpecification
Threadlock 262 TA-26WSK-M2G351-A6

Material

  1. Use a slide hammer or tools suitable to remove the cylinder block core plug.
  2. Inspect the cylinder block plug bore for any damage that would interfere with the correct sealing of the plug. If the cylinder block plug bore is damaged, bore for the next oversize plug.
  3. Coat the cylinder block core plug and bore lightly with Threadlock 262 and install the cylinder block core plug.

Cup-Type

  1. Use a tool suitable to seat the cup-type cylinder block core plug.

Expansion-Type

  1. Use tool suitable to seat the expansion-type cylinder block core plug.

More articles — Engine System - General Information