Home/Ford/Focus ST/Ford Focus ST III (2012-2015)/Repair manual/Engine - 2.0l Ecoboost/VALVE SPRING - COMPRESSION PRESSURE SPECIFICATIONS

Contents

Section: Engine - 2.0l Ecoboost

ENGINE SPECIFICATIONS

LUBRICANTS SPECIFICATIONS

ENGINE OIL CAPACITY SPECIFICATIONS

OIL PRESSURE SPECIFICATIONS

CYLINDER BLOCK SPECIFICATIONS

PISTON SPECIFICATIONS

PISTON PIN SPECIFICATIONS

CRANKSHAFT SPECIFICATIONS

CYLINDER HEAD SPECIFICATIONS

VALVE SPECIFICATIONS

VALVE SPRING - COMPRESSION PRESSURE SPECIFICATIONS

VALVE TAPPET SPECIFICATIONS

CAMSHAFT SPECIFICATIONS

Overview

Engine Identification

Lubrication System

Valve Train

Ti-VCT

Special Tool(s) / General Equipment

Balance Shaft Backlash

Installation

Valve Cover

Removal

Crankshaft Pulley

Crankshaft Front Seal

Engine Front Cover

Timing Drive Components

Camshaft

Valve Tappets

Valve Springs

Cylinder Head

Oil Pan

Oil Pump

Oil Filter Adapter

Removal and Installation

Flywheel

Crankshaft Rear Seal

Engine Mount

Valve Stem Seals

Oil Pressure Switch — Part 1

Oil Pressure Switch — Part 2

DISASSEMBLY

Piston

All sections

VALVE SPRING - COMPRESSION PRESSURE SPECIFICATIONS Ford Focus ST III

Engine - 2.0l Ecoboost

VALVE SPRING - COMPRESSION PRESSURE SPECIFICATIONS

Item	Specification
Intake and exhaust (installed)	40 lb (18 kg)
Intake (valve open) 9.2 mm (0.3622 in) of lift	101 lb (46 kg)
Exhaust (valve open) 9.2 mm (0.3622 in) of lift	101 lb (46 kg)
Free length	1.8860 in (47.904 mm)
Assembled height	1.4921 in (37.9 mm)

VALVE SPRING - COMPRESSION PRESSURE