Home ReviewsRefund
Home/Ford/Focus ST/Ford Focus ST III (2012-2015)/Repair manual/Electric Powertrain Cooling/Coolant Filter
Contents Section: Electric Powertrain Cooling All sections

Coolant Filter Ford Focus ST III

Electric Powertrain Cooling 1 illustration ~117 words

Coolant Filter

Special Tool(s)/General Equipment

Hose Clamp Remover/Installer

Note. Removal steps in this procedure may contain installation details.

  1. WARNING: Before beginning any service procedure in this information, REFER to Safety Warnings in 100-00 General Information. Failure to follow this instruction may result in serious personal injury. Refer to: «ENGINE COOLING SYSTEM HEALTH AND SAFETY PRECAUTIONS»(/ford/focus-st/iii-2012-2015/remont/oem-general-information/#general-information-electric__engine-cooling-system-health-and-safety) (100-00 General Information, Description and Operation).
  2. Refer to: «JACKING AND LIFTING - OVERVIEW»(/ford/focus-st/iii-2012-2015/remont/oem-general-information/#jacking-lifting-electric) (100-02 Jacking and Lifting, Description and Operation).
  3. NOTE: Be prepared to capture escaping fluid. General Equipment : Hose Clamp Remover/Installer Torque : 2 Nm 10 Nm

Scheme 137

Scheme 137
Scheme 137
  1. To install, reverse the removal procedure.
  2. Refer to: «COOLING SYSTEM FILLING AND BLEEDING»(/ford/focus-st/iii-2012-2015/remont/cooling-system-mechanical/#electric-powertrain-cooling) (303-03 Electric Powertrain Cooling, General Procedures).