MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) | MERCON® V | |
| PAG Refrigerant Compressor Oil (R-134a Systems) YN-12-D | WSH-M1C231-B | 281 ml (9.5 fl oz) |
| R-134a Refrigerant YN-19 (US); CYN-16-P or CYN-16-R (Canada) | WSH-M17B19-A | 1.02 kg (36 oz) (2.25 lb) |
MATERIAL SPECIFICATIONS
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Magnetic Clutch | |
| Air gap between pulley and clutch plate | 0.35-0.65 mm (0.014-0.026 in) |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| A/C compressor bolts | 25 |
| A/C compressor fitting nuts (suction and discharge) | 15 |
| A/C compressor mounting stud | 9 |
| A/C compressor nut | 25 |
| A/C compressor pressure relief valve | 10 |
| A/C clutch disc and hub bolt | 14 |
| Auxiliary evaporator inlet line fitting nut | 15 |
| Auxiliary evaporator outlet line fitting nut | 15 |
| Condenser bolts | 6 |
| Condenser fitting nuts (inlet and outlet) | 15 |
| Cross-vehicle beam nuts | 30 |
| Evaporator inlet line fitting bracket bolt | 15 |
| Evaporator inlet line fitting nut | 15 |
| Evaporator outlet line fitting nut | 15 |
| Front bumper cover bolts | 6 |
| Heater core and evaporator core housing bolts | 7 |
| High-pressure Schrader-type valve | 2.5 |
| High-pressure service gauge port valve cap | 0.8 |
| Low-pressure Schrader-type valve | 1.8 |
| Low-pressure service gauge port valve cap | 0.8 |
| Receiver/drier bolts | 9 |
| Receiver/drier outlet fitting nut | 15 |
| Thermostatic Expansion Valve (TXV) bolts | 8 |
| TXV fitting nut | 8 |
| TXV fitting stud | 8 |
| TXV manifold and tube bracket bolt | 15 |
| TXV manifold and tube clamp bracket bolt | 9 |
TORQUE SPECIFICATIONS