TORQUE SPECIFICATIONS
| Description | Nm | Lb-ft | Lb-in |
|---|---|---|---|
| Bracket-to-catalytic converter bolts (3.5L) | 20 | 177 | |
| Catalytic converter support bracket-to-transmission bolts (3.5L) | 48 | 35 | |
| Catalytic converter-to-exhaust manifold nuts (3.5L) | 40 | 30 | |
| Catalytic converter-to-exhaust manifold studs (3.5L) | 25 | 18 | |
| Exhaust Y-pipe-to-LH catalytic converter nuts (3.5L) | 40 | 30 | |
| Exhaust Y-pipe-to-RH catalytic converter nuts (3.5L) (1) | |||
| Exhaust Y-pipe-to-exhaust flange pipe nuts (3.5L) | 40 | 30 | |
| LH exhaust flexible pipe-to-LH catalytic converter nuts (3.5L Gasoline Turbocharged Direct Injection (GTDI)) (1) | |||
| LH and RH catalytic converter-to-turbocharger nuts (3.5L GTDI ) | 40 | 30 | |
| LH and RH exhaust flexible pipes-to-underbody catalytic converter nuts (3.5L GTDI ) | 40 | 30 | |
| LH and RH turbocharger-to-catalytic converter studs (3.5L GTDI ) | 25 | 18 | |
| RH exhaust flexible pipe-to-RH catalytic converter bolts (3.5L GTDI ) | 40 | 30 | |
| Torca® clamp (3.5L) | 55 | 41 | |
| Worm gear clamp | 7 | 62 | |
| (1) Refer to the appropriate procedure(s). | |||
| (1) | Refer to the appropriate procedure(s). |
TORQUE SPECIFICATIONS
The 3.5L exhaust system consists of
- two exhaust manifold mounted catalytic converters.
- an exhaust Y-pipe.
- a resonator assembly.
- a muffler and tail pipe assembly.
- isolators installed on the body and muffler hangers.
The 3.5L Gasoline Turbocharged Direct Injection (GTDI) exhaust system consists of
- two turbocharger-mounted catalytic converters.
- two flexible pipe assemblies.
- an underbody catalytic converter.
- a muffler and tail pipe assembly.
- isolators installed on the body and muffler hangers.
The exhaust system provides an exit for exhaust gases and reduces engine noise by passing exhaust gases through the catalytic converters and muffler assembly. Rubber exhaust hanger isolators attach the exhaust system to the mounting hooks.
See also:
• JACKING AND LIFTING