Home/Ford/Flex/Ford Flex I (2008-2013)/Repair manual/Charging System/Battery, Battery Mounting & Battery Cables: Specifications
Contents Wiring diagrams Section: Charging System All sections

Battery, Battery Mounting & Battery Cables: Specifications Ford Flex I

GENERAL SPECIFICATIONS

ItemSpecification
Cold Cranking Amps (CCA) measured at -18°C (0°F) - 3.5L Gasoline Turbocharged Direct Injection (GTDI)750 CCA
CCA measured at -18°C (0°F) - 3.5L non- GTDI650 CCA
Voltage12 Volt

GENERAL SPECIFICATIONS

TORQUE SPECIFICATIONS

DescriptionNm
Battery cable terminal nuts5
Battery Junction Box (BJB) cable nut (3.5L)10
Battery terminal cable end nuts (3.5L)9
Battery terminal cable end nuts (3.5L Gasoline Turbocharged Direct Injection (GTDI))9
Battery tray bolts15
Battery tray nut15
Body ground cable bolt (3.5L)12
Engine cover ball stud (3.5L GTDI )6
Engine ground cable bolt12
Electronic Power Assist Steering (EPAS) ground wire bolt (3.5L GTDI )10
EPAS harness bracket bolt (3.5L GTDI )10
Generator B+ cable nut17
Radio interference capacitor bolt (3.5L GTDI )12
Starter B+ cable nut12
Starter solenoid terminal nut6

TORQUE SPECIFICATIONS