Home ReviewsRefund
Home/Ford/Fiesta/Ford Fiesta Mk6 (2008-2013)/Repair manual/Automatic Trans/Automatic Transmission - Automatic Transaxle/transmission E…
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission - Automatic Transaxle/transmission External Controls: Removal & Installation Ford Fiesta Mk6

Automatic Trans 6 illustrations ~114 words

Installation

Pinpoint Test B

B5 RCM

Scheme 293

Scheme 293: Removal
Scheme 293: Removal

Scheme 294

Scheme 294
Scheme 294

Scheme 295

Scheme 295
Scheme 295

Scheme 296

Scheme 296
Scheme 296

Scheme 297

Scheme 297
Scheme 297

Scheme 298

Scheme 298
Scheme 298
  1. Remove the selector lever trim ring.
  2. Remove the upper console panel.
  3. Slide the selector lever knob bezel downward.
  4. Remove and discard the 2 selector lever knob screws.
  5. Remove the center console LH panel.
  6. Disconnect the Transmission Control Switch (TCS) electrical connector and remove the wiring harness fastener from the selector lever housing.
  7. Remove the selector lever knob.

Pinpoint Test B

B3 TCS

More articles — Automatic Transmission - Automatic Transaxle/transmission External Controls