TORQUE SPECIFICATIONS (TRANSFER CASE)
Note. For drive shaft nut and bolt torque specifications, refer to TORQUE SPECIFICATIONS .
Note. For additional Transfer Case torque specifications, see appropriate OVERHAUL article.
| Application | Ft. Lbs. (N.m) |
|---|
| Damper Bolt |
| Borg-Warner 13-54 | 25-35 (34-47) |
| Drain & Filler Plug |
| Borg-Warner 13-56 | 10-14 (14-19) |
| Borg-Warner 44-05 | 11 (15) |
| All Others | 12-20 (16-27) |
| Shift Lever Assembly Bolt |
| Borg-Warner 13-54 |
| Bolt "A" (1) | 70-90 (95-122) |
| Bolt "B" (1) | 31-42 (42-57) |
| Transfer Case-To-Transmission Extension Housing Bolt |
| Borg-Warner 13-54 (2) | 25-35 (34-47) |
| Borg-Warner 13-56 (3) | 25-43 (34-58) |
| Borg-Warner 44-05 | 30 (41) |
| (1) Bolt "A" is large bolt and bolt "B" is the small bolt. (Схема №3) (2) Tighten bolts to specification in sequence. (Схема №2) (3) Tighten bolts to specification in sequence. (Схема №4) |
| (1) | Bolt "A" is large bolt and bolt "B" is the small bolt. (Схема №3) |
| (2) | Tighten bolts to specification in sequence. (Схема №2) |
| (3) | Tighten bolts to specification in sequence. (Схема №4) |
TORQUE SPECIFICATIONS (TRANSFER CASE)
TORQUE SPECIFICATIONS (TRANSMISSION)
Note. For drive shaft nut and bolt torque specifications, refer to TORQUE SPECIFICATIONS .
| Application | Ft. Lbs. (N.m) |
|---|
| AX4S (Windstar) |
| Engine Mount Through-Bolt | 55-75 (75-102) |
| Engine Mount-To-Subframe Bolt | 60-85 (81-115) |
| Rear Engine Mount-To-Transaxle | 52 (70) |
| Starter Bolt | 16-21 (22-28) |
| Subframe-To-Body Bolt | 55-75 (76-102) |
| Torque Converter-To-Flexplate Nut | 27 (36) |
| Transaxle-To-Engine Bolt | 30 (40) |
| E4OD |
| Crossmember-To-Frame Bolt | 50-70 (68-95) |
| Starter Bolt | 20-34 (27-46) |
| Torque Converter Drain Plug | 18-20 (24-27) |
| Torque Converter-To-Flexplate | 22-30 (30-41) |
| Transmission Mount-To-Crossmember Nut | 60-80 (81-108) |
| Transmission-To-Engine Bolt |
| Gasoline Engine | 30-40 (41-54) |
| Diesel | 39-52 (53-71) |
| 4F20E (Villager) |
| Drain Plug | 25 (34) |
| Front Transaxle Mount Bolt | 30-38 (41-52) |
| Front Transaxle Mount Through-Bolt | 47-54 (64-73) |
| Rear Transaxle Mount Nut | 32-41 (43-56) |
| Rear Transaxle Mount Through-Bolt | 32-41 (43-56) |
| Torque Converter-To-Flexplate Nut | 38 (52) |
| Transaxle-To-Engine Bolt |
| Lower | 26 (35) |
| Upper | 32 (44) |
| 4R70W & 4R100 |
| Cooler Lines | 15-18 (20-24) |
| Cooler Line Case Fittings | 22-27 (30-36) |
| Crossmember-To-Frame Bolt |
| Except Van | 64-81 (87-110) |
| Van | 50-70 (68-95) |
| Drive Shaft-To-Companion Flange | 76 (103) |
| Parking Brake Assembly Filler Plug | 25-30 (34-41) |
| Parking Brake Assembly-To-Transmission Bolt (1) | 25-43 (34-58) |
| Starter Bolt | 16-20 (22-27) |
| Torque Converter Drain Plug | 21-23 (28-31) |
| Torque Converter-To-Flexplate Nut |
| Except Van | 20-34 (27-46) |
| Van | 22-30 (30-41) |
| Transmission Mount-To-Crossmember Nut |
| Explorer & Mountaineer | 73-97 (99-132) |
| Pickup & Van | 64-81 (87-110) |
| Transmission-To-Engine Bolt |
| Except Van | 30-41 (41-56) |
| Van | 39-52 (52-70) |
| 4R44E & 5R55E |
| Crossmember-To-Frame Bolt |
| Ranger | 65-85 (88-115) |
| Torque Converter-To-Flexplate Nut | 22-30 (30-41) |
| Transmission Mount-To-Crossmember Nut |
| Ranger | 65-85 (88-115) |
| Transmission Mount-To-Transmission Extension Housing Bolt | 60-80 (81-108) |
| Transmission-To-Engine Bolt | 30-41 (41-56) |
| (1) DO NOT reuse bolts. |
TORQUE SPECIFICATIONS (TRANSMISSION)
