Home/Ford/Explorer/Ford Explorer II (1994-2003)/Repair manual/Automatic Trans/Automatic Transmission (4R44E/5R55E) - Servicing: Specifica…
Contents Wiring diagrams Section: Automatic Trans All sections

Automatic Transmission (4R44E/5R55E) - Servicing: Specifications Ford Explorer II

FLUID CAPACITIES

Note. Transmission fluid capacities in TRANSMISSION FLUID CAPACITIES are approximate quantities. Correct fluid level should be determined using dipstick. See CHECKING FLUID LEVEL .

Application(1) Qts. (L)
4R44E
2WD9.5 (9.0)
4WD9.8 (9.3)
5R55E
2WD (2)9.5 (9.0)
4WD (2)9.8 (9.3)
(1) Includes oil cooler (if equipped). (2) On Explorer and Mountaineer models, add .25 qt (.9L) for vehicles equipped with 4.0L SOHC.
(1)Includes oil cooler (if equipped).
(2)On Explorer and Mountaineer models, add .25 qt (.9L) for vehicles equipped with 4.0L SOHC.

TRANSMISSION FLUID CAPACITIES

ApplicationPts. (L)
Borg-Warner 13-542.5 (1.2)
Borg-Warner 13-56
With PTO12.2 (5.8)
Without PTO4.0 (1.9)
Borg-Warner 44-052.5 (1.2)
Borg-Warner 44-06(1)
Borg-Warner 44-07(1)
Borg-Warner 44-722.7 (1.3)
Dana TC-284.5 (2.1)
(1) Refill capacity not available at time of publication. Fill until fluid is level with filler plug opening.
(1)Refill capacity not available at time of publication. Fill until fluid is level with filler plug opening.

TRANSFER CASE REFILL CAPACITIES

TORQUE SPECIFICATIONS

TransmissionFt. Lbs. (N.m)
Manual Lever-To-TR Sensor Nut31-40 (42-54)
INCH Lbs. (N.m)
Filter Screen71-98 (8-11)
Transmission Range (TR) Sensor/Switch Bolts71-98 (8-11)
Oil Pan115-133 (13-15)

TORQUE SPECIFICATIONS