INTRODUCTION
Component testing procedures are provided to determine whether a component is good or bad.
Testing information for each component includes a schematic, a view of the terminal locations and step-by-step test procedures. Terminal locations are identified by numbers or letters that may be on the component or next to it. (Scheme 1)
The component connector MUST BE REMOVED before testing. To test a single circuit within the component, select that circuit under the column "Circuit to test". If you wish to test the complete component, perform all tests.
Connect the tester to the terminals shown in the second column and operate the component as shown in the third column.
Scheme 1
Scheme 2
Scheme 2: HEADLAMP SWITCH, EXTERIOR LAMPS
Scheme 3
Scheme 3: HEADLAMP SWITCH, INTERIOR LAMPS
Scheme 4
Scheme 4: IGNITION SWITCH (11572)
Scheme 5
Scheme 5: MULTIFUNCTION SWITCH, WIPER/WASHER PORTION
Scheme 6
Scheme 7
Scheme 7: Multifunction Switch, Lamp Portion
Scheme 8
Scheme 9
Scheme 9: MULTIFUNCTION SWITCH, TURN PORTION
Scheme 10
Scheme 11
Scheme 11: MASTER WINDOW ADJUST SWITCH (14529) - SPORT
Scheme 12
Scheme 12: MASTER WINDOW ADJUST SWITCH (14529) - SPORT TRAC
Scheme 13
Scheme 14
Scheme 14: POWER WINDOW SWITCH - PASSENGER DOOR
Scheme 15
Scheme 15: POWER WINDOW SWITCH - LH SIDE REAR
Scheme 16
Scheme 16: POWER WINDOW SWITCH - RH SIDE REAR
Scheme 17
Scheme 17: EXTERIOR REAR VIEW MIRROR SWITCH (17B676)
Scheme 18
Scheme 19
Scheme 19: DOOR LOCK SWITCH - DRIVER SIDE
Scheme 20
Scheme 20: DOOR LOCK SWITCH - PASSENGER SIDE
Scheme 21
Scheme 21: LIFTGATE DOOR LOCK SWITCH
Scheme 22
Scheme 22: SEAT ADJUST SWITCH - WITH SIDE AIR BAGS
Scheme 23
Scheme 23: SEAT ADJUST SWITCH - WITHOUT SIDE AIR BAGS
Scheme 24
Scheme 24: RELAY - MINI ISO
Scheme 25
Scheme 25: RELAY - MICRO ISO
