Removal and Installation
| CAUTION | Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. |
| CAUTION | Prior to the removal of the module, it is necessary to upload module configuration information to the appropriate diagnostic equipment. This information needs to be downloaded into the new module once installed. For additional information, refer to MODULE CONFIGURATION . |
Scheme 45
- Disconnect the battery. For additional information, refer to «BATTERY, MOUNTING AND CABLES»(ref-209935) .
- Slide the driver seat module forward to remove it from the bracket.
- Disconnect the connectors and remove the DSM.
- To install, reverse the removal procedure.