WHEEL TIGHTENING
Note. This vehicle is built with metric thread on wheel studs and lug nuts. Installation of an English thread nut on a metric stud (or vice versa) will not properly secure wheel to the hub and will damage the stud. Damaged studs may result in wheel separation.
Tighten all wheel lug nuts to 65-88 ft. lbs. (88-119 N.m). If wheels are equipped with locking type lug nuts, ALWAYS position keyed nut opposite the valve stem.
BATTERY SPECIFICATIONS
| CAUTION | When battery is disconnected, vehicles equipped with computers may lose memory data. When battery power is restored, driveability problems may exist on some vehicles. These vehicles may require a relearn procedure. See COMPUTER RELEARN PROCEDURES article in the GENERAL INFORMATION section. |
All models use BX-35 batteries.