Home/Ford/Escape/Ford Escape I facelift (2004-2007)/Repair manual/Removal & Installation/Electronic Engine Control System - 3.0L (4V): Specifications
Contents Wiring diagrams Section: Removal & Installation All sections

Electronic Engine Control System - 3.0L (4V): Specifications Ford Escape I facelift

GENERAL SPECIFICATIONS

ItemSpecification
Lubricants and Chemicals
SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (in Canada Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12) or equivalentWSS-M2C930-A
High Temperature Nickel Anti-Seize Lubricant XL-2 (in Canada CXG-2) or equivalentESE-M12A4-A
Penetrating and Lock Lubricant XL-1

GENERAL SPECIFICATIONS

TORQUE SPECIFICATIONS

DescriptionNm
Camshaft position (CMP) sensor bolt10
Catalyst monitor sensor48
Crankshaft position (CKP) sensor bolt10
Heated oxygen sensor (HO2S)48
Fuel rail pressure and temperature sensor bolts8
Idle air control (IAC) valve bolts10
Manifold absolute pressure (MAP) sensor nut9
Mass air flow (MAF) sensor screws10
Powertrain control module stud bolts9
RH splash shield bolts9
Throttle position (TP) sensor screws3

TORQUE SPECIFICATIONS

See also:
JACKING AND LIFTING