Transmission Fluid Cooler Tube Replacement
When fluid leakage is found at the transmission fluid cooler tubes or installation of new cooler tubes is necessary, refer to TRANSAXLE-TRANSMISSION COOLING - CD4E .
Removal and Installation
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to «JACKING AND LIFTING»(ref-232183) .
- Disconnect the breather tube and mass air flow (MAF) sensor.
- Remove the intake tube and air cleaner cover.
- Remove the air cleaner assembly.
- Remove the mount through bolt. To install, tighten to 120 Nm (89 lb-ft).
- Remove the 1 retaining bolt and the 2 nuts for the mount and remove the mount. To install, tighten to 90 Nm (66 lb-ft).
- To install, reverse the removal procedure.