GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| A/C Compressor SC90V variable scroll | |
| A/C compressor type | SC90V variable scroll |
| Variable displacement | 90 cc (5.5 cubic inches) |
| A/C compressor rotation | Clockwise |
| A/C Compressor FS-10 | |
| Displacement | 170 cc (10.4 cubic inches) |
| Cylinder bore | 29.0 mm (1.14 in) |
| Cylinder stroke | 25.7 mm (1.0 in) |
| Rotation | Clockwise |
| Magnetic clutch | |
| Air gap between pulley and hub mm (inches) | 0.35-0.75 (0.014-0.029) |
| A/C cycling switch - 2.3L, 3.0L (4V) | |
| Close | 200-317 kPa (29-46 psi) |
| Open | 138-165 kPa (20-24 psi) |
| A/C cycling (low charge protection) switch - Escape Hybrid | |
| Close | 276 kPa Max (40 psi) |
| Open | 76-90 kPa (11-13 psi) |
| Front thermistor (when front and rear systems are in operation) | |
| Cut-in/Cut-out | 5°C (41.5°F) / 3°C (38°F) |
| Front thermistor (when front system is in operation) | |
| Cut-in/Cut-out | 3°C (38°F) / 1°C (34°F) |
| Rear thermistor (all the time) | |
| Cut-in/Cut-out | 7°C (44.6°F) / 5°C (41°F) |
| High Pressure Cut-Off Switch - Escape, Mariner | |
| Fan ON (closed contacts) | 2,241 kPa (325 psi) |
| Fan OFF (open contacts) | 1,896 kPa (275 psi) |
| A/C clutch cut-out (open contacts) | 3,103 kPa (450 psi) |
| A/C clutch cut-in (closed contacts) | 1,724 kPa (250 psi) |
| Dual function pressure switch - Escape Hybrid | |
| Fan ON (closed contacts) | 2,137-2,344 kPa (310-340 psi) |
| Fan OFF (open contacts) | 1,655-2,137 (240-310 psi) |
| A/C clutch cut-out (open contacts) | 2,999-3,275 kPa (435-475 psi) |
| A/C clutch cut-in (closed contacts) | 1,517-1,931 kPa (220-280 psi) |
| Evaporator core orifice tube size/color - Escape Hybrid | |
| Color | Orange |
| Diameter | 1.44 mm (0.057 in) |
| A/C pressure relief valve | |
| Open | 3,792 kPa (550 psi) minimum |
| Lubricant | |
| PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) | WSH-M1C231-B |
| Capacity - 2.3L, 3.0L (4V) | 266 ml (9 oz) |
| Capacity - Escape Hybrid | 325 ml (11 oz) |
| Refrigerant Compressor Oil (Mineral Oil) F73Z-19577-AA (Motorcraft YN-9-A) | ESH-M2C31-A2 |
| Refrigerant | |
| R-134a Refrigerant YN-19 | WSH-M17B19-A |
| Capacity - 2.3L, 3.0L (4V) | 850 g (1 lb, 14 oz) |
| Capacity - Escape Hybrid | 1162 g (2 lb, 9oz) |
| Thermal Limiter Sealant | |
| Silicone Gasket and Sealant TA-30 | WSE-M4G323-A4 |
| Cleaner | |
| A/C Systems Flushing Solvent YN-23 | |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS - ESCAPE HYBRID
| Description | Nm |
|---|---|
| A/C compressor mounting bolts | 25 |
| A/C compressor clutch nut | 26 |
| A/C line (peanut) fittings | 8 |
| A/C service lines tube fittings (3/8" line) | 10 |
| A/C service lines tube fittings (5/8" line) | 37 |
| A/C compressor thermal limiter bolt | 6 |
| Auxiliary water pump bolts | 7 |
| Auxiliary evaporator core mounting bolts | 8 |
| Auxiliary evaporator core upper air duct nuts | 8 |
| Compressor manifold and tube assembly bolt | 21 |
| Compressor manifold and tube assembly bracket nut | 8 |
| Speed control actuator nuts | 7 |
| Condenser core support bolts | 6 |
| Condenser to evaporator line bracket nut | 8 |
| Evaporator inlet line fitting nuts | 10 |
| Passenger zone valve fitting nuts | 10 |
| Passenger zone valve mounting nut | 8 |
| Suction accumulator mounting bracket bolt | 8 |
| Upper radiator mounting bracket bolts | 9 |
TORQUE SPECIFICATIONS - ESCAPE HYBRID
TORQUE SPECIFICATIONS - 2.3L & 3.0L (4V)
| Description | Nm |
|---|---|
| A/C compressor bolts | 25 |
| A/C compressor clutch disc and hub bolt (FS-10) | 13 |
| A/C compressor discharge line bolt | 20 |
| A/C compressor clutch disc and hub nut (SC90V) | 26 |
| A/C compressor inlet line bolt | 20 |
| A/C compressor nut | 25 |
| A/C cycling switch | 3 |
| Compressor manifold and tube assembly bolt | 20 |
| Compressor manifold and tube assembly bracket nuts | 8 |
| Condenser core line (peanut) fittings | 8 |
| Condenser to evaporator line bracket nut | 8 |
| Condenser core bracket bolts | 9 |
| Suction accumulator mounting bracket nuts | 8 |
| Suction accumulator to compressor line mounting nuts | 8 |
TORQUE SPECIFICATIONS - 2.3L & 3.0L (4V)
See also:
• JACKING AND LIFTING