Home/Ford/Escape/Ford Escape I рестайлинг (2004-2007)/Repair manual/Suspension Front/Suspension System - General Information: Specifications
Contents Section: Suspension Front All sections

Suspension System - General Information: Specifications Ford Escape I рестайлинг

GENERAL SPECIFICATIONS

ItemSpecification
Side-to-Side Lean (all vehicles)
Front0 mm (0 in) +/- 10 mm (0.39 in)
Rear0 mm (0 in) +/- 10 mm (0.39 in)
Ball Joint Deflection
Lower0-0.2 mm (0-0.008 in)
Tire Balance Weight
Maximum balance weight (total of inner and outer wheel flange)140 g (5.0 oz) per wheel 70 g (2.5 oz) per flange
Tire Inflation
TiresSee safety certification sticker on driver door jamb
Lubricants
High Temperature Nickel Anti-Seize Lubricant XL-2 (Canada CXG-2-B)ESE-M12A4-A
Penetrating and Lock Lubricant XL-1 (Canada CXC-51-A)
Wheel Cleaner
Custom Bright Metal Cleaner 8A-19522-AESR-M5B194-B

GENERAL SPECIFICATIONS

TIGHTENING TORQUE SPECIFICATIONS

DescriptionNmLb-ft
Front Suspension
Strut upper mounting nuts4030
Tie-rod end jam nut5541
Rear Suspension
Wheel knuckle bolt11585

TIGHTENING TORQUE SPECIFICATIONS

ALIGNMENT SPECIFICATIONS

ItemLHRHSplitThrust Angle
Front
Caster1.60° +/- 1.00°1.60° +/- 1.00°0.00° +/- 0.75°
Camber1.00° +/- 0.75°1.00° +/- 0.75°0.00° +/- 0.75°
Toe @ curb ride height (positive value is toe-in, negative value is toe-out)0.23° +/- 0.23°
Rear - Early Build (1)
Camber0.20° +/- 0.75°0.20° +/- 0.75°
Toe @ curb ride height (positive value is toe-in, negative value is toe-out)0.10° +/- 0.20°0.10° +/- 0.20°0.20° +/- 0.20°0.00° +/- 0.30°
Rear - Late Build
Camber0.00° +/- 0.75°0.00° +/- 0.75°
Toe @ curb ride height (positive value is toe-in, negative value is toe-out)0.03° +/- 0.20°0.03° +/- 0.20°0.06° +/- 0.20°
(1) Vehicles built prior to 8/2/04 at the Kansas City Assembly or prior to 8/16/04 at the Ohio Assembly.
(1)Vehicles built prior to 8/2/04 at the Kansas City Assembly or prior to 8/16/04 at the Ohio Assembly.

ALIGNMENT SPECIFICATIONS

See also:
JACKING AND LIFTING