Contents Wiring diagrams Section: Collision/avoidance All sections

Parking Aid System: Other Ford Edge I

Collision/avoidance 1 illustration

Elevation System Check

  1. Turn the ignition to the ON position, engine off.
  2. Set the parking brake.
  3. Place the gear shift in REVERSE (R).
  4. Verify that no audible alerts are heard. If audible alerts are heard, check to make sure the bumper is correctly installed and is not tilted downward so that the sensor is pointing at the ground.

Scheme 12

Scheme 12: Parking Aid Module
ItemPart NumberDescription
1Parking aid module (PAM) nut
215K866PAM
3PAM electrical connector (part of 14A005)