GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| SAE 15W-40 Super Duty Motor Oil XO-15W40-QSD or equivalent | WSS-M2C171-D |
GENERAL SPECIFICATIONS
TORQUE SPECIFICATIONS
| Description | Nm |
|---|---|
| Engine coolant temperature (ECT) sensor | 12 |
| Fuel injector control module (FICM) mounting bolts | 13 |
| Powertrain control module (PCM) mounting bolt | 7 |
| Crankshaft position (CKP) sensor | 13 |
| Camshaft position (CMP) sensor | 13 |
| Intake air temperature 2 (IAT2) sensor | 17 |
| Exhaust pressure (EP) sensor | 10 |
| Engine oil temperature (EOT) sensor | 12 |
| Engine oil pressure (EOP) switch | 12 |
| Turbocharger variable geometry control valve | 24 |
| Mass airflow (MAF) screws | 2 |
| Bulkhead electrical connector | 5 |
TORQUE SPECIFICATIONS
The electronic engine controls consist of the following
- Camshaft position (CMP) sensor
- Powertrain control module (PCM)
- Fuel injector control module (FICM)
- Engine coolant temperature (ECT) sensor
- Manifold absolute pressure (MAP) sensor
- Intake air temperature 2 (IAT2) sensor
- Accelerator pedal position (APP) sensor
- Engine oil temperature (EOT) sensor
- Exhaust pressure sensor
- Crankshaft position (CKP) sensor
- Engine oil pressure (EOP) switch
- Barometric pressure (BARO) sensor
- Turbocharger variable vane hydraulic control valve
- Mass airflow (MAF) sensor
For further component description and operation, see INTRODUCTION -- 6.0L DIESEL article.
See INTRODUCTION -- 6.0L DIESEL article .
See also:
• JACKING & LIFTING