EGR Function Testing - Diesel Ford Ford Cutaway E350

Diesel (2003-2009 6.0L)

1. Connect the scan tool.
2. Engine at operating temperature.
3. Key ON, engine OFF.
4. Refer to the scan tool operating manual for instructions.
5. Access the EGR System Test on the scan tool.
6. Carry out the EGR System Test and follow the directions on the scan tool.
7. If there are no DTCs present, all tests pass and all PIDs displayed are in range (may appear as green on the scan tool), the system is operating correctly at this time. Clear the DTCs, repeat the self-test.
8. If any of the tests do not pass, refer to the pinpoint test that corresponds to the PID that is out of range (may appear as red on the scan tool).

TEST 2

For EGR testing, see appropriate TESTING & DIAGNOSTICS article in ENGINE PERFORMANCE section of electronic information product.