Manual sections

Repair manual

Module Communications Network -- E-Series Ford Cutaway E350 Super Duty

Step-by-step instructions on "Module Communications Network -- E-Series" for Ford Cutaway E350 Super Duty (2008–2012). Pick an article — removal, installation, adjustment and diagnostics with illustrations.

General information

Network Termination

Gateway Module

Special Tool(s)

Principles of Operation

High Speed Controller Area Network (HS-CAN) Modules

Medium Speed Controller Area Network (MS-CAN) Modules

Controller Area Network (CAN) Fault Tolerance

Controller Area Network (CAN) Multiplex Messages

Inspection and Verification

DTC Charts

Symptom Chart

Pinpoint Test A: The PCM Does Not Respond To The Scan Tool

Normal Operation

Pinpoint Test B: The ABS Module Does Not Respond To The Scan Tool

Pinpoint Test C: The Instrument Panel Cluster (IPC) Does Not Respond To The Scan Tool

PINPOINT TEST C: THE IPC DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test D: The Restraints Control Module (RCM) Does Not Respond To The Scan Tool

PINPOINT TEST D: THE RCM DOES NOT RESPOND TO THE SCAN TOOL

PINPOINT TEST E: THE TBC MODULE DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test F: The Smart Junction Box (SJB) Does Not Respond To The Scan Tool

PINPOINT TEST F: THE SJB DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test G: The Audio Control Module (ACM) Does Not Respond To The Scan Tool

PINPOINT TEST G: THE ACM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test H: The Parking Aid Module (PAM) Does Not Respond To The Scan Tool

PINPOINT TEST H: THE PAM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test I: The Satellite Digital Audio Receiver System (SDARS) Module Does Not Respond To The Scan Tool

PINPOINT TEST I: THE SDARS MODULE DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test J: The Global Positioning System Module (GPSM) Does Not Respond To The Scan Tool

PINPOINT TEST J: THE GPSM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test K: The Accessory Protocol Interface Module (APIM) Does Not Respond To The Scan Tool

PINPOINT TEST K: THE APIM DOES NOT RESPOND TO THE SCAN TOOL

Pinpoint Test L: No Medium Speed Controller Area Network (MS-CAN) Communication, All Modules Are Not Responding

PINPOINT TEST L: NO MS-CAN COMMUNICATION, ALL MODULES ARE NOT RESPONDING

PINPOINT TEST M: INTERMITTENT NO MS-CAN COMMUNICATION, COMMUNICATION CAN BE INTERMITTENTLY ESTABLISHED

Pinpoint Test N: No High Speed Controller Area Network (HS-CAN) Communication, All Modules Are Not Responding

PINPOINT TEST N: NO HS-CAN COMMUNICATION, ALL MODULES ARE NOT RESPONDING

PINPOINT TEST O: INTERMITTENT NO HS-CAN COMMUNICATION, COMMUNICATION CAN BE INTERMITTENTLY ESTABLISHED

Pinpoint Test P: No Power To The Scan Tool