Fuel Pressure Specifications — Ford Crown Victoria I (1992-1997)

Engine	(1) KOER psi (kg/cm 2 )	KOEO psi (kg/cm 2 )
1.3L	(2) 30-38 (2.1-2.7)	(3) (4)
1.6L	(5) 27-34 (1.9-2.4)	(6) 64-85 (4.5-6.0)
1.8L	(7) 31-38 (2.2-2.7)	(4) 64-85 (4.5-6.0)
2.0L	(8) 30-38 (2.1-2.7)	(4) 64-92 (4.5-6.5)
2.5L	(8) 30-35 (2.1-2.5)	(4) 72-92 (5.1-6.5)
3.0L	35-38 (2.5-2.7)	40-43 (2.8-3.0)
(1) Specification is with engine running and vacuum hose connected to fuel pressure regulator. (2) Fuel pressure should be 38-45 psi (2.7-3.2 kg/cm 2 ) with engine running and vacuum hose disconnected from fuel pressure regulator. (3) Fuel pressure should be 50 psi (3.5 kg/cm 2 ) or more. (4) Fuel pressure should be 38-45 psi (2.7-3.2 kg/cm 2 ) with ignition switch off, engine not running and a jumper wire is connected between ground and fuel pump terminal at data link connector. (5) Fuel pressure should be 35-43 psi (2.5-3.0 kg/cm 2 ) with engine running and vacuum hose disconnected from fuel pressure regulator. (6) Fuel pressure should be 38-42 psi (2.7-3.0 kg/cm 2 ) with ignition switch off, engine not running and a jumper wire is connected between ground and fuel pump terminal at data link connector. (7) Fuel pressure should be 40-49 psi (2.8-3.4 kg/cm 2 ) with engine running and vacuum hose disconnected from fuel pressure regulator. (8) Fuel pressure should be 38-45 psi (2.7-3.2 kg/cm 2 ) with engine running and vacuum hose disconnected from fuel pressure regulator.

(1)	Specification is with engine running and vacuum hose connected to fuel pressure regulator.

(2)	Fuel pressure should be 38-45 psi (2.7-3.2 kg/cm 2 ) with engine running and vacuum hose disconnected from fuel pressure regulator.

(3)	Fuel pressure should be 50 psi (3.5 kg/cm 2 ) or more.

(4)	Fuel pressure should be 38-45 psi (2.7-3.2 kg/cm 2 ) with ignition switch off, engine not running and a jumper wire is connected between ground and fuel pump terminal at data link connector.

(5)	Fuel pressure should be 35-43 psi (2.5-3.0 kg/cm 2 ) with engine running and vacuum hose disconnected from fuel pressure regulator.

(6)	Fuel pressure should be 38-42 psi (2.7-3.0 kg/cm 2 ) with ignition switch off, engine not running and a jumper wire is connected between ground and fuel pump terminal at data link connector.

(7)	Fuel pressure should be 40-49 psi (2.8-3.4 kg/cm 2 ) with engine running and vacuum hose disconnected from fuel pressure regulator.

(8)	Fuel pressure should be 38-45 psi (2.7-3.2 kg/cm 2 ) with engine running and vacuum hose disconnected from fuel pressure regulator.

1994 FUEL PRESSURE SPECIFICATIONS (CARS - EEC- GASOLINE)

Engine	KOER psi (kg/cm 2 )	KOEO psi (kg/cm 2 )
3.0L Ranger	(1)	35-45 (2.5-3.2)
3.8L Mustang	(1)	35-45 (2.5-3.2)
4.6L Thunderbird	(1)	35-45 (2.5-3.2)
4.6L Cougar	(1)	35-45 (2.5-3.2)
(1) Information is not available from manufacturer.

(1)	Information is not available from manufacturer.

1994 FUEL PRESSURE SPECIFICATIONS (EEC-V)

1994 FUEL PRESSURE SPECIFICATIONS (CARS - EEC-IV - GASOLINE)

Engine	KOER psi (kg/cm 2 )	KOEO psi (kg/cm 2 )
4.9L MFI	45-60 (3.2-4.2)	50-60 (3.5-4.2)
All Others	28-45 (2.0-3.2)	35-45 (2.5-3.2)

1994 FUEL PRESSURE SPECIFICATIONS (TRUCKS - EEC-IV - GASOLINE)

Application		Psi (kg/cm 2 )
VIN K & M
At Fuel Filter Inlet (1)		2 (.14)
At Fuel Filter Outlet (2)		1 (.07)
At Fuel Return Line (2)		2 (.14)
VIN F
Fuel Line Pressure		(3) 30-70 (2.1-4.9)
(1) Measured at idle. (2) Measured at 3300 RPM. (3) Direct Injection (DI) system. Pressure is measured at regulator block. Specification is with engine at high idle/full load.

(1)	Measured at idle.

(2)	Measured at 3300 RPM.

(3)	Direct Injection (DI) system. Pressure is measured at regulator block. Specification is with engine at high idle/full load.

1994 FUEL PRESSURE SPECIFICATIONS (TRUCKS - 7.3L DIESEL)

Engine	Psi (kg/cm 2 )
All Models	1.25-1.5 (.09-.11)

1994 FUEL PRESSURE SPECIFICATIONS (LPG)

Fuel Pressure Specifications Ford Crown Victoria I