TORQUE SPECIFICATIONS (AX4N & AX4S)
| Application | Ft. Lbs. (N.m) |
|---|
| Cooler Line Connector At Transaxle | 18-23 (24-31) |
| Cooler Line Nut At Radiator | 12-17 (16-24) |
| Engine Mount-To-Subframe Nuts | 57-75 (77-103) |
| Exhaust Pipe Nuts & Bolts | 25-33 (34-46) |
| Ground Strap Bolt | 30-40 (40-55) |
| Lower Control Arm-To-Knuckle | 57-67 (68-92) |
| Stabilizer Bar Link Bolts | 23-29 (31-40) |
| Starter-To-Bellhousing | 16-21 (21-29) |
| Steering Gear-To-Subframe | 84-98 (113-133) |
| Tie Rod-To-Knuckle Nut | (1) 35-46 (47-63) |
| Torque Converter-To-Flexplate Nut | 20-34 (27-46) |
| Transaxle Mount-To-Subframe Nut | 57-75 (77-103) |
| Transaxle-To-Engine Bolt | 41-50 (55-68) |
| Wheel Lug Nut | 85-105 (115-142) |
| INCH Lbs. (N.m) |
| Oil Pan Bolt | 96-132 (11-15) |
| (1) Tighten to minimum torque; then tighten to nearest cotter pin slot. |
| (1) | Tighten to minimum torque; then tighten to nearest cotter pin slot. |
TORQUE SPECIFICATIONS (AX4N & AX4S)
TORQUE SPECIFICATIONS (CD4E)
| Application | Ft. Lbs. (N.m) |
|---|
| Exhaust Pipe Mounting Bolts | 30 (40) |
| Front Strut Upper Nuts | 34 (46) |
| Lower Control Arm Bolt | 61 (83) |
| Lower Radiator Support Brackets | 20 (27) |
| Oil Cooler Lines | 17 (23) |
| Starter Bolts | 35 (48) |
| Steering Mounting Bolts | 96 (130) |
| Subframe-To-Body Retaining Bolts | 96 (130) |
| Tie Rod Ends | 23-35 (31-47) |
| Torque Converter-To-Flexplate Nut | 27 (36) |
| Transaxle Stabilizer Mount | 89 (120) |
| Transaxle Support Bracket | 35 (48) |
| Transaxle-To-Engine Bolt | 30 (40) |
| Wheel Lug Nut | 94 (127) |
| INCH Lbs. (N.m) |
| Oil Filler Tube Bolt | 62-80 (7-9) |
TORQUE SPECIFICATIONS (CD4E)
TORQUE SPECIFICATIONS (F4E III)
| Application | Ft. Lbs. (N.m) |
|---|
| Drain Plug | 29-39 (40-53) |
| Engine Crossmember-To-Chassis | 48-65 (65-88) |
| Engine Crossmember-To-Engine Mount | 28-37 (38-51) |
| Front & Rear Engine Mount Nut | 28-37 (38-50) |
| Shift Cable Connecting Nut | 12-16 (16-22) |
| Torque Converter-To-Flexplate Nut | 26-36 (35-49) |
| Transaxle-To-Converter Housing Bolt | 28-38 (38-52) |
| Transaxle-To-Engine Bolt | 41-59 (56-80) |
| Wheel Lug Nut | 66-87 (89-118) |
| INCH Lbs. (N.m) |
| Oil Filler Tube Bolt | 70-95 (8-11) |
| Oil Pan Bolt | 74-95 (8.4-11) |
TORQUE SPECIFICATIONS (F4E III)
TORQUE SPECIFICATIONS (4R70W)
| Application | Ft. Lbs. (N.m) |
|---|
| Cooler Line-To-Trans. Fittings | 10-16 (13-22) |
| Crossmember-To-Chassis Bolt | 35-46 (47-63) |
| Crossmember-To-Trans. Mount Nut | 65-87 (88-118) |
| Drive Shaft Flange Bolts | 65-87 (88-119) |
| Flexplate-To-Crankshaft Bolt | 54-64 (73-87) |
| Gear Selector Cable | 16 (22) |
| Starter Mounting Bolts | 16-20 (22-28) |
| Torque Converter Access Cover Bolt | 23-29 (30-40) |
| Torque Converter-To-Flexplate Nut | 20-34 (27-46) |
| Trans. Rear Mount-To-Transmission | 51-67 (68-92) |
| Transmission-To-Engine Bolt | 30-40 (40-55) |
| INCH Lbs. (N.m) |
| Oil Pan Bolt | 107-144 (12-16) |
TORQUE SPECIFICATIONS (4R70W)
